10m³ 8bar LNG High Vacuum Insulated Cryogenic Tank

• Customization: Available
• Warranty: 1 Year
• Function: Storage Pressure Vessel
• Application: Liquefied Gas
• Material: Stainless Steel
• Pressure: 1.6MPa≤p<10.0MPa
• Storage Medium: Moncombustible/Nontoxic
• Pressure Level: Medium Pressure (1.6MPa≤p<10.0MPa)
• Condition: New
• Type: Vertical or Horizontal
• Working Pressure: 8bar
• Filling Rate: 90%
• Color: Customized / Standard [White]
• Transport Package: Road, Sea or Railway
• Specification: 10m3
• Trademark: Doer
• Origin: China
• HS Code: 8609001100

Product Description

 

Product Parameters

Design code	ASME Boiler and Pressure Vessel Code Section VIII Division 1 -2023
	GB/T150.1~4-2011 "Pressure Vessels"
	GB/T18442.1~6-2019 "Static vacuum insulated cryogenic pressure vessel"
Type	Vertical or Horizontal
Insulation Type	High Vacuum Multilayer Insulation
Design Temperature	Inner Vessel	-196ºC
	Outer Shell	50ºC
The Main Material	Inner Vessel	06Cr19Ni10
	Outer Shell	Q345R
Working Pressure	8Bar
Effective Volume	10m^3
Filling rate	90%
Painting	Primer + intermediate coat + topcoat (3 layers)
Color	Customized / Standard [white]
Design service life	20 years
Transport Package	Nude, saddle support

 

Technical Requirements

1. The storage tank is equipped with stainless steel cryogenic globe valve, combined vacuum valve (including vacuum gauge to measure the vacuum degree of the insulation layer at any time), safety valve, relief device, pressure gauge, liquid level gauge and other valve instruments;
2. The inner vessel is equipped with two sets of independent over-pressure relief devices to effectively ensure the safety of the tank. In addition, the safety explosion-proof devices installed on the outer vessel further ensure the safety and reliability of the entire equipment.
3. For the inner vessel of the storage tank, 100% Radiographic Testing (RT) is first performed on Category A and Category B welded joints. This is followed by 100% Penetrant Testing (PT) on all welded joints. After ensuring that the non-destructive testing results are qualified, a pneumatic test is conducted on the inner vessel. Finally, each weld and joint is subjected to a leak test using a helium mass spectrometer leak detector.
4. The finished paint film on the outer surface of the storage tank is dense, firm and reliable, and the dry film thickness of the paint is greater than 200 µm.
5. The tank needs to be replaced with nitrogen before leaving the factory. Fill the interior of the liquid container with 0.03~ 0.05Mpa pressure nitrogen gas for protection.
6. The LNG high vacuum storage tank is easy to install and have low maintenance costs. It is mainly used in city gas supply, industry combustion gas supply and gas station, etc.

 

Company Profile

FAQ